Varimat V2
The new VARIMAT V2 like its predecessor displays voltage and welding seam length - plus using the new VARIMAT V2 plastic insulation sheets can be welded more rapidly and so at lower cost.
Technical Data: |
|
|
Voltage |
V~ |
200,230, 400 |
Power consumption |
W |
4200,4600, 5700 |
Temperature |
°C |
20-620 |
Speed |
m/min |
0.7 - 12 |
Air flow range |
% |
50 - 100 |
Welding nozzle width |
mm |
40 |
Size L x W x H |
mm |
640 x 430 x 330 |
Weight |
Kg |
35 |
Marking of conformity |
|
|
Approval mark |
|
|
Certification scheme |
|
CCA |
Protection class I |
|
|
Article Number |
|
137.821 |
• |
At more than 8 m/min the highest welding speed (depending on material) |
• |
Guide bar prevents back pain |
• |
Maintenance free blower, no carbon brushes to replace |
• |
User friendly display with “e-Drive” (press and turn button) to recall pre-set and saved welding settings |
• |
Close loop system for continuous welding speed |
• |
The patented pendulum / pressure roller smoothes out any unevenness |
Technical Data |
|
|
Voltage |
V~ |
120, 200, 230 |
Power consumption |
W |
2700, 3000, 2300/3400 |
Frequency |
Hz |
50 / 60 |
Temperature |
°C |
20-650, steplessly adjustable |
Air flow @ 20C |
1/min |
max. 350, manual air slide |
Pressure static |
Pa |
3000 (30 mbar) |
Heating element tube* |
|
Ø 50 |
Size |
mm |
320 x 95, handle Ø 64 |
Weight |
Kg |
1,5 with 3 m cord |
Leister Mistral 220
The Mistral's qualities become especially apparent where large quantities of heat are required in a limited space. This tool is so handy that even the most inaccessible places can be reached. Thanks to its brushless motor, maintenance is reduced to an absolute minimum, making the Mistral a reliable, cost-effective and powerful device.
• |
Brushless blower motor for continuous operation |
• |
Light and handy |
• |
Deployable as a built-in device and a hand tool |
• |
Temperature manually adjustable |
• |
Large air flow and high temperature |
• |
Integrated device and heating element protection |
• |
Wide range of accessories |
Triac Drive: Overlap welding tool
The compact, easy handling semi-automatic overlap welding tool.
• |
Steplessly controlled temperature and speed guarantees higher welding seam quality |
• |
Small and compact |
• |
Easy handling |
• |
Higher welding speed compared to hand welding |
• |
For use in tight places |
Technical Data |
|
|
|
Voltage |
V~ |
230 |
120 |
Power consumption |
W |
1700 |
1700 |
Frequency |
Hz |
50 / 60 |
|
Temperature |
°C |
20 – 620 (68 – 1150) steplessly controllable |
|
Drive |
cfm |
8.12 |
|
Emissions level |
PSI |
approx o.435 |
|
Size |
inch |
13.4 x 3.5, handle ø 2.2 |
|
Weight |
lbs |
3 (with 10 feet cord) |
|
Approval mark |
|
CCA Certified |
|
Hot Jet S
The most compact hand tool from Leister the Hot Jet S - perfect for detail and repairs.
Order# |
Description |
107.144 |
Tubular nozzle ø 5mm "pencil tip" |
107.142 |
Wide slot nozzle 20mm overlap - detail and repair nozzl |
106.972 |
Brass detail roller - 6mm wide |
106.974 |
80mm extra-wide silicon roller |
106.975 |
40mm silicon roller from Leister - sealed bearings for long life |
AS-22C |
40mm silicon roller from Everhard |
106.97 |
28mm wide pressure rollerd |
Extra Nozzles For Triac S Welder
Leister Triac S Welder
A hot air welding tool that is fitted with a standard 30B1 40 mm push-fit nozzle. Electronically controlled temperature reads 68° - 1400° F and runs on 110 volt.
A |
Wide slot nozzle #30B1-40 mm (11/2”) for overlap welding: L02170.A |
B |
Angled nozzle #30A3-20 mm (3/4”), 60° bend for overlap welding: L02170.B |
C |
Wide slot nozzle 30A7-60 mm (2 1/4”) for overlap welding elastomer bitumen: L0217.J |
D |
Wide slot nozzle #30A1-20 mm (3/4”) for overlap welding: L02170 |
E |
Extension nozzle 5 mm (3/16” dia.): L021701 |
F |
Wide slot nozzle #30B2-40 mm (11/2”) w/holes for overlap welding ECB coverings: L02170.F |
G |
Angled nozzle #30A2-20 mm (3/4”) 90° bend for overlap welding: L02170.G |
Product Spcs:
Wt. 3 Lbs.
L02150
Test signs:
CCA certificated
*made of stainless steel